Allen Antiques

Gauntlet finger - A-236-Together Gauntlet finger - A-236-ThreePartsInLine Gauntlet finger - A-236-top Gauntlet finger - A-236-inside Gauntlet finger - A-236-FirstPlate Gauntlet finger - A-236-ThirdPlate Gauntlet finger - A-236-Knuckle Gauntlet finger - A-236-KnuckleForward Gauntlet finger - A-236-KnuckleFront Gauntlet finger - A-236-grey-inside-sideways Gauntlet finger - A-236-grey-inside-straight Gauntlet finger - A-236-knuckle-outside Gauntlet finger - A-236-plate1-outside Gauntlet finger - A-236-plate2-outside Gauntlet finger - A-236-knuckle-angle-outside Gauntlet finger - A-236-overlapped-angle Gauntlet finger - A-236-overlapped-top Gauntlet finger - A-236-straight-stretched Gauntlet finger - A-236-side-by-side Gauntlet finger - A-236-overlapped-angle-angle Gauntlet finger - A-236-outside-angle-top Gauntlet finger - A-236-angle-outside-angle-stretched Gauntlet finger - A-236-stretched-straight-angle Gauntlet finger - A-236-straight-stretch-medium

Gauntlet finger 1370-1400

English. Three finger plates from a fourteenth century English gauntlet, most likely an hourglass gauntlet. Comprising the first, knuckle and second plates. Main plates decorated with raised ridges at the center bordered by pairs of engraved lines. First plate with slightly domed areas at both ends bordered with a lightly engraved line. Third plate with a slightly domed area at the front that is bent down slightly. Knuckle of domed form with a raised ridge the edges with an engraved line parallel to the edge with plain file decoration like simple roping. Each plate with two rivets to secure them to the foundation arranged down the length of the main plates and on the sides of the knuckle plates. Made of iron. Old, mostly stable oxidized finish on the exterior. Found at Queenhithe, London. Publications: Object and Economy in Medieval Winchester Martin Biddle (Fig 349) Medieval Artifacts Nigel Mills. (Fig 245b) and Armour of the English Knight 1400-1450 by Tobias Capwell page 166 - illustrated along with several separate gadlings in private collections.

Measurements: First plate 2 3/32 in. long, 1 3/32 in. wide at the back end, 7/8 in wide at the front (measured at the very end before the corners are beveled back). Knuckle 1 3/16 in wide, 31/32 long at the side, 15/16 at the center. Third plate 1 3/4 in. long, 1 in wide at the back and 7/8 in wide at the line demarking the shaped area at the end where it starts tapering more. All width measurements performed flat under the curved plates. Thickness: generally .040-.050 with some thick spots up to .060 in.



If you have any questions, please send them to Wade Allen

This site last updated Fri Dec 31 13:07:53 EST 2021